Sankabos pagrindinio cilindro pirkimo vadovas
Paskutinį kartą atnaujinta: 2026 m. balandžio 24 d.
The clutch master cylinder converts the mechanical force from the clutch pedal into hydraulic pressure, which actuates the clutch slave cylinder. A failing master cylinder causes a soft or sinking clutch pedal, difficulty disengaging the clutch, and eventually the inability to change gears. Replacement restores positive clutch pedal feel.
Clutch master cylinder failure symptoms
Internal seal failure in the master cylinder allows fluid to bypass, reducing the hydraulic pressure needed to disengage the clutch.
- Clutch pedal slowly sinks to the floor when held down
- Soft or spongy clutch pedal feel
- Difficulty selecting gears, especially first and reverse
- Clutch fluid level drops in the reservoir with no visible external leak
- Clutch pedal stays on the floor and does not return
Replacement tips
Clutch master cylinder replacement requires bleeding the hydraulic system to remove air.
- Bleed the system after fitting — start at the slave cylinder
- Check the slave cylinder for leaks at the same time — often both need replacing together
- Use the correct specification clutch/brake fluid as specified by the manufacturer
- Inspect the clutch pedal pivot and pushrod for wear
Kategorijos puslapis
- Peržiūrėti tinkamas dalis
Sankabos pedalas krinta iki grindų? Pagrindinio cilindro nuotėkio simptomai, stabdžių skysčio suderinamumas ir keitimo eiga.
Susiję gidai
- Automatic Gearbox Buying Guide
Slipping, harsh shifts, and TCU faults — how automatic transmissions fail, fluid service intervals, and when to rebuild vs replace your gearbox.
- Clutch Release Bearing Buying Guide
Squealing when pressing the clutch pedal — identifying a worn release bearing, replacing it alongside the clutch kit, and avoiding premature failure.
- Diferencialo pirkimo vadovas
Ūžiantis tiltas ir riboto slydimo pagrindai — diferencialo alyvos tipai, dažni gedimai ir keitimas ar remontas.
- Manual Gearbox Buying Guide
Crunching gears, oil leaks, and whining noises — diagnosing manual gearbox faults, the case for reconditioned vs new units, and oil specification.
Dažnai užduodami klausimai
Is the clutch master cylinder the same as the brake master cylinder?
No. They are separate units. The clutch master cylinder operates the clutch hydraulic circuit only. The brake master cylinder operates the braking hydraulic circuit.
Can I drive with a failing clutch master cylinder?
As the cylinder deteriorates, gear changes become difficult or impossible. If the pedal stays on the floor, the vehicle cannot be driven safely.
How do I bleed the clutch hydraulic system?
Open the bleed nipple on the slave cylinder, press the clutch pedal to the floor, close the nipple, release the pedal. Repeat until no air bubbles emerge. Some systems require vacuum or pressure bleeding.
Why does my clutch pedal stay down?
A failed master cylinder seal, broken return spring, or air in the hydraulic system can prevent the pedal from returning. Check the master cylinder first.
How much does clutch master cylinder replacement cost?
The price of a clutch master cylinder depends on your exact vehicle and the brand you choose. Enter your registration above to see parts confirmed to fit, then compare prices from the brands we stock on this page. Free UK delivery on orders over £50.
Susiję gidai
Slipping, harsh shifts, and TCU faults — how automatic transmissions fail, fluid service intervals, and when to rebuild vs replace your gearbox.
Clutch Release Bearing Buying GuideSquealing when pressing the clutch pedal — identifying a worn release bearing, replacing it alongside the clutch kit, and avoiding premature failure.
Diferencialo pirkimo vadovasŪžiantis tiltas ir riboto slydimo pagrindai — diferencialo alyvos tipai, dažni gedimai ir keitimas ar remontas.
Manual Gearbox Buying GuideCrunching gears, oil leaks, and whining noises — diagnosing manual gearbox faults, the case for reconditioned vs new units, and oil specification.
Pasiruosę rasti tinkamą dalį?
Naršyti atsargines dalis